Bearing maintenance cycle and method

1. Bearing on how to maintain

To make the bearings and keep its long-term performance into full play, must earnestly to do regular maintenance (check). Through proper periodic inspection, do early detection of fault, prevent accident arrangement is very important to increase productivity and efficiency. Takes care of the bearing were coated with right amount at the time of delivery of anti-rust oil and anti-rust paper, as long as the packaging is not damaged, the quality of the bearing will be guaranteed. But long stored in humidity below 65%, under the condition of temperature is 20 ℃ or so, in the shelf 30 cm above the ground is advisable. In addition, the place should avoid direct sunlight or of safekeeping and touch the walls of the cold. And, when the bearing will be removed to check, use methods such as photography first and then record the appearance. In addition, to confirm the amount of residual lubricant and lubricant sampling, and then clean the bearing.

2. The bearing maintenance steps

1) remove the wheels first, remember to put away their screw, off trouble.

2) remove the bearing, some of the wheel core is very tight, bearing is hard to tear open come down to, with the hexagon wrench (is that one of the screw) of hard to dig down to it, rest assured, bearing it is not easy to bad.

3) use first toothbrush brushes off the dirt on the surface of the palin, do this also, not bad.

4) some bearing side cover is removable, others are not, to determine whether palin detachable.

5) if it is removable, is very simple. Precision screwdriver with a word, in the C ring gap, to pry up the C ring, then side cover off, as long as the down side.

6) if it is not detachable, will be more troublesome, want to use the method of damage type. With precision screwdriver into the side cover of the seam, forcibly pry up the side cover, don't doubt, that's right, but the side cover is not returned. As long as the down side, open on both sides is destroyed.

7) all the bearing side side cover removed, you can begin to wash. Scouring oil into the bowl, mixed bearing threw a stir.